Description
Included in the kit:
Two M3 x 6 screws – For mounting the optic plate to the slide
Two M4 x 8 screws – For mounting Holosun optics to the RMR‑footprint plate
Two M4 x 9 screws – For mounting Leupold Delta Point Pro, select Gideon and select Holosun optics to the optic plate
Installation Notes:
Apply blue thread locker to all screws before installation and allow 24 hours for full cure before use.
For installation of the optic plate to the side, torque M3x6 screws to the slide at 10-12 inch lbs.
For installation of your optic to the optic plate, torque M4 screws to the optic plate using the optic manufacturer’s recommended specifications. We recommend 14-16 inch lbs.
